Lab electric constant temperature drying oven
The drying oven is applicable for drying, baking, melting and sterilization industrial and mining enterprises, laboratories and scientific research institutes.
1. Streamlined shape with aesthetic design concept, the surface is electrostatically sprayed, and the door is equipped with a large viewing angle tempered glass observation window.
2. The working room is made of mirror-quality stainless steel argon arc welding. The shell is made of high quality cold-rolled steel.
3. LCD large screen display shows the set parameters and measured parameters.
4. High-performance thermostat function to avoid evaporation of samples.
5. Using a new type of synthetic silicone sealing strip, it can run for a long time at high temperature, long service life and easy replacement.
6. The hot air circulation system consists of a fan that can run continuously at high temperature and a well-designed air duct to improve the temperature in the working room.
7. The shelf inside the box can be adjusted freely.
8. Microcomputer P.I.D temperature controller with over-temperature deviation protection and digital display, with timing function and high temperature control accuracy.
9. Upgraded sound and light alarm environment scanning microcomputer chip, with more powerful data processing functions.
10. With over temperature alarm, timed shutdown, call recovery, parameter encryption, temperature correction and other functions.
11. With power-off recovery function, after the external power supply suddenly powers off and calls again, the device can automatically resume operation according to the original setting program.
12. Consider the ultimate safety protection design to achieve triple safety protection for people, samples and equipment.
13. Safety function: sensor fault alarm, over temperature alarm, independent over-rise preventer, independent over-temperature protector, over-current trip protection, etc.
1. Factory is very close to Tianjin, which ensure the efficiency for goods’ delivery.
2. Strong R&D team to design and test product, professional engineers and technicians to offer technical assistance.
3. We follow the advanced technology and improve the functions of products with humanization design on the production experience of generation product.
4. For small quantity goods, we can shipping by DHL, UPS, Fedex and so on.
Hot air blast
AC110V 60Hz/AC220V 50Hz
Temperature range (°C)
Maximum number of shelf (pc)
1. The drying box consumes a large amount of current, so it must have sufficient capacity for the power cord, knife switch, fuse, plug, socket, etc. For safety, the case should be grounded.
2. The items placed in the box should not be too much, too crowded. If the dried item is wet, open the venting window. When heated, the blower can be activated so that the water vapor is accelerated out of the tank. But don't let the blower run continuously for a long time, pay attention to proper rest.
3. The heat sink on the lower part of the drying box should not be placed to avoid rotting or causing burning.
4. When the glassware is sterilized by high temperature dry heat, the temperature inside the box must be lowered before the door can be opened to prevent the glass from bursting due to cold.
5. It is strictly forbidden to put flammable, explosive and volatile items into the box to avoid accidents.
6. If you need to observe the items in the constant temperature room, you can open the outer door and observe it through the inner glass door. The number of opening the door should not be too much, so as not to affect the constant temperature.