Electric Pressure Sterilizer
This product is suitable for medical and health undertakings, scientific research, agriculture and other units. It is an ideal equipment for disinfecting and sterilizing medical equipment, dressings, glassware, and solution culture media. It is also an essential inspection equipment for QS and HACCP certification for food factories and drinking water plants.
1. The whole sterilizer is made of high quality stainless steel material, which is resistant to acid and alkali and high temperature.
2. Anti-skid bearing structure, strong stability.
3. Use a heating tube that is resistant to dry burning and automatically stop heating when dry.
4. The venting valve designed by the decompression principle can effectively relieve pressure and open the lid quickly. The overpressure self-discharge safety valve has a rated working pressure of 0.142mpa to prevent the pressure in the pot from being too high and to ensure safe use.
5. The dexterously designed double-scale two-class pressure gauge also displays the temperature and pressure values in the pot to facilitate data reading.
6. Self-expanding sealing ring design, high efficiency sealing, safe and more assured.
1. Type B is a common type: it can be used for gas heating or electric heating.
2. Type A is a B-type improved type: the power switch and the water discharge nozzle are added to facilitate the control of heating and drainage speed.
3.Type D is intelligent temperature control type: with automatic constant temperature, constant temperature timing, low water level protection and so on.
Rated Working Pressure
AC110V 60Hz/AC220V 50Hz
We insist on the principle of quality first, honest and trustworthy are the foundation . We cordially hope to cooperate with all friends in domestic and abroad forever by our excellent quality products , honest and trustworthy management idea and good service.
1.What's The MOQ?
Usually 1 Set/Piece.If you order more,we could offer you more reasonable and competitive prices.
2.How Long Is The Average Production Time And What Is The Delivery Time?
We have some products in stock,delivery time is within 3-14 working days. If you order a large number,the production time will be within 20-45 days,therefor delivery time will be in 20-45 days after we get the deposit.
3.How Long Is The Warranty Period?
Most of our products are warranted for one year.The warranty does not cover malfunction or damage caused by intentional improper operation. The specific interpretation of the warranty rules belongs to the company.
1. After the sterilization is completed, please wait until the gauge pointer is “0” and then open the top cover. When the sterilization chamber is under pressure, the interlock handle cannot be lifted. Do not force the door to open.
2. Do not quickly relieve pressure when sterilizing liquid. Only when the liquid temperature drops below 70 °C can the door be opened. Open the door immediately after sterilization is prohibited.
3. The sterilizer probe and water level gauge should be cleaned regularly.
4. Check if the air inlet is blocked before use, and the door frame and rubber ring are damaged. It is recommended to apply some talcum powder on the strip after daily use to extend the life of the strip.
5. The drain valve is recommended to be cleaned once a month to facilitate the discharge of cold air and maintain the temperature.
6. After one year of use, it is recommended to invite relevant testing departments to conduct comprehensive and systematic inspections every year.
7. Do not rely solely on automatic water level protection. Always pay attention to the water level to avoid burning the electric heating tube.